5, CCR7-PB (Biolegend, San Diego, CA) and CD45RA-PE, CD4-APCCy7, CD27-V500 (BD) followed by membrane permeabilization and fixing (BD). Expression of intracellular cytokines was detected using interferon-γ-APC and TNF-α-APC (BD). 200,000–500,000 cells were then analyzed using a either a FACSCaliber (BD) or FACSCanto flow cytometer, and Cellquest or Diva (BD) software. For

the ELISPOT assay 96 well filter plates (Millipore, Billrica, MA) were coated 18 h prior to use with PBS containing 15 μg/mL interferon-γ capture antibody (Mabtech, Mariemont, OH) at 4 °C. The plates were coated for 2 h at room temperature with complete culture media to block non-specific binding. PBMC were diluted to 3–5 × 106 cells/mL and selleck screening library 100 μL plated per well on the antibody pre-coated elispot plates with or without addition of 15 μM peptide (TpD). Positive control wells were stimulated with 10 μg/mL phytohemagglutinin (PHA (Sigma). After 18 h of incubation at 37 °C, elispot plates were washed in PBS containing 0.05% Tween 20 (Fisher Scientific, Waltham, MA), followed by incubation with 100 μL biotinylated anti-IFN-γ secondary antibody for 2 h at room temperature. Elispot plates were then washed 3 times in PBS/tween-20 buffer (Fisher Scientific) and three times in PBS. IFN-γ spots were developed using 100 μL

Dolutegravir concentration per well 3-amino-9-ethylcarbazole (Sigma), dimethylformamide (Sigma) and hydrogen peroxide until (Sigma) in acetate buffer. After 5–10 min of development, plates were thoroughly washed in water and dried.

Interferon-γ positive elispot counts were scored by an outside vendor (ZellNet, Fort Lee, NJ). Statistical analysis was performed in Excel, and data plotted using SigmaPlot. The nicotine nanoparticle is generated using a double emulsion process. A primary water-in-oil emulsion is formed by high shear mixing of a primary aqueous solution (TpD in 60% lactic acid) and an organic solution containing polylactic acid-polyethylene glycol-nicotine (PLA-PEG-nicotine), poly(lactic-co-glycolic acid)-R848, and PLA in dichloromethane at controlled speeds and temperatures. The double emulsion (water-in-oil-in-water) is formed by adding a secondary aqueous solution (phosphate buffer with 10% polyvinyl alcohol) to the primary emulsion and high shear mixing at controlled speeds and temperatures for a fixed duration. The PVA and phosphate buffer solution form the continuous phase. The nanoparticles are formed and hardened by evaporation of the organic solvent (dichloromethane) from a well-stirred suspension. As the solvent is removed from the emulsion, the polymeric matrix condenses and hardens into nanoparticles. The nanoparticles are further washed in PBS, and the final nanoparticle suspension is passed through a 0.2 μm filter. ELISA plates were coated with 100 μL per well of a polylysine–nicotine conjugate in PBS and incubated overnight at 4 °C. Plates were washed 3 times in wash buffer (PBS/0.