This speed can meet the detection requirements for a warp knittin

This speed can meet the detection requirements for a warp knitting machine. Most of the optimization works are dependent on processor hardware features, which include the following aspects:(1)Make good use of internal memory. Level 1 (L1) on-chip memories operate at core clock frequency, and provide high bandwidth and low latency. On-chip memories include SRAM and cache. The code executive speed could be improved greatly by manually putting crucial data and codes into the SRAM. The cache is a kind of internal memory, which manages a processor automatically, and thus, only the crucial codes and data are placed manually into SRAM, while other codes and data just use the cache.(2)Make full use of DMA operation.

Since the DMA controller works in parallel with the CPU, system performance can be greatly improved if we transfer video data from peripherals to memories by DMA while the CPU is simultaneously processing other parts of the data. In fact, the DMA and SRAM are used together. Crucial data are moved from off-chip memories to on-chip memories via DMA first, then computing could start on this block, and at the same time, the DMA begins to move the next block of data.(3)Execute the most important code via DSP-specific instructions. Specific instructions process video data in multi-media application oriented DSP, such as SAD, pixel add and subtract operations.(4)Arrange the program code to execute the sequence properly and to improve the cache hit rate via reducing branches and jumps.(5)Use hardware loop in Blackfin instead of software loop because this hardware loop has a jump mechanism without any CPU payload.

(6)Reduce data access to external memories as much as possible. Since external memories operate using the system clock, a bottleneck will form in the system performance if data acce
Application of high-speed video cameras is expanding to various fields of sciences, including bio-medical sciences and engineering. To meet the ever-growing performance demands for improved sensitivity, frame rate, and pixel count, the image sensors for high-speed imaging have introduced several innovations. Very high sensitivity has been achieved by single-photon imaging technologies [1]. Even in 2000, imaging at 40,500 frames per second (fps) Batimastat was applied to capturing cavitation bubbles released by a snapping shrimp [2].

The standard frame rate of the camera was 4,500 fps for 256 �� 256 pixels, and the sensitivity was enhanced by directly attaching an image intensifier with a micro-channel plate to the image sensor [3]. By increasing the frame rate with partial readout of only 64 �� 64 pixels, the motion of the cavitation cloud was successfully captured.While the highest frame rate of video cameras is continuously being renewed, there are still many important phenomena that cannot be imaged even with the most advanced high-speed video cameras.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>